Le CEA-Liten sera présent au World PM 2022 qui se tiendra du 9 au 13 octobre 2022 à Lyon.
Venez rencontrer nos experts sur le stand 117, et discuter avec eux à propos de nos dernières innovations dans les domaines de la CIC (Compression Isostatique à Chaud) et de la fabrication additive.
Plus d'infos sur la CIC 
ici.
Plus d'infos sur la fabrication additive ici.
Planning des interventions de nos experts :
Frayssines P.E.
12/10 à 18h00
| Influence of HIP temperature on the microstructure, tensile strength and impact toughness of dense nitrogen atomised 304L powder
|
Bacchetta G
12/10 à 17h40
| Short-loop recycling of sintered NdFeB magnets by hydrogen decrepitation
|
Baudry M.
13/10 à 8h50
| Development of bulk thermoelectric N-type SiGe alloy by laser powder bed fusion
|
Soulier M.
12/10 à 11h20
| Relationship between powder properties and powder layer quality in powder-bed-based additive manufacturing processes
|
Baffie T.
13/10 à 14h30
| Effect of powder batches and laser power on the microstructure and properties of as-built and heat-treated Laser Powder Bed Fusion CuCrZr samples
|
Burr A.
13/10 à 14h30
| Numerical modeling of powder spreading in additive manufacturing processes: effects of process parameters and particle size distribution
|
Bioud T.
12/10 à 18h00
| Net-Shap NdFeB magnets made by Powder Injection Molding: Lowering the organic contamination
|
Tosoni O.
12/10 à 17h20
| High-coercivity NdFeB Magnets With Laser Powder Bed Fusion Method: impact of scanning strategy
|
Delette G.
10/10 à 16h15
| New Challenges For High Performance Rare Earth Permanent Magnets
|
Luca S.
13/10 à 11h40
| Toward the reduction of Heavy Rare Earth elements in high performance NdFeB permanent magnets by the refinement of the strip cast flakes microstructure.
|